HP AMP 130 Printer AiO Support
HP AMP 130 Setup
HP AMP 130 Setup, make use of the guides that are given below and make your printer ready to print the desired document or photo:
Step 1: Unpack the HP AMP 130 printer from the shipment box and peel off all the packaging materials and tapes from the printer.
Step 2: Link the power cable and insert the ink cartridges into the AMP 130 printer ‘s respective slot.
Step 3: Place enough papers into the input tray of the printer.
Step 4:Prior to loading it, ensure that the papers are compatible with the printer.
Step 5: Download and install the HP AMP 130 Setup software. During the installation, choose an appropriate connection type.
HP AMP 130 Printer Services
A driver is essential for all the devices. Each operating system has a unique driver. Prior to downloading the driver, check the compatibility and start downloading. You can download and install the printer driver on your computer using two methods. A. Using the installation CD or B. Downloading the driver from this website.
A printer manual provides all sorts of printer information like printer specification, setup guides, troubleshooting tips and the printer maintenance tips. All you need to do is, click on the Manual Download option that is available on this website to get the manual for the printer. Download the manual and save it on your system for further reference.
HP AMP 130 Printer Unboxing and Setting Up
First Time HP AMP 130 Setup
Once you receive a printer from the shipment, you need to unpack it. After unpacking the printer, set it up. Without setting up the printer, you cannot use it for printing. Make use of the procedures that are listed below to easily setup the printer. Make your printer ready to print the desired document or photo:
Unbox the HP AMP 130 Printer from the box
- Take off the HP AMP 130 Setup from the box. Unwrap all the tapes and stickers from the printer and unlock the cartridge access door and remove the tapes inside it.
- Connect the power cord to the printer and the press the printer’s button to turn it on.
- Link the printer to the computer via a USB cable. A Wireless connection is not preferable for the first-time setup.
- Take out a new ink cartridge from the packing material and then remove all the tapes from it.
- Now insert the new cartridge into the respective slot. Place the black ink cartridge into the right side of the slot and then insert the color ink cartridge into the left side of the slot.
- After installing the cartridges, place sufficient paper into the input tray and wait for the HP AMP 130 Setup to print the alignment page.
- If you have any queries, contact our technical support team at the toll-free number.
HP AMP 130 Driver installation
Prior to starting up the installation process, ensure that the computer and printer are connected properly. The driver gets varied based on the operating system. Before downloading the driver, check the compatibility. Make use of the guides that are given below to download and install the printer driver on the computer.
HP AMP 130 Driver Installation for Windows
You have two methods to download and install the driver on the computer. A. Using the installation CD B. From this website.
Use the installation CD that came with your printer to install the driver on the computer.
Ensure that the CD you are using for the installation is free from dust and scratch.
Power on the computer, open the computer’s disc drive and place the installation CD into it.
Based on the on-screen instructions, run and execute the setup file. If you find any difficulty while installing the driver, you can move to the next step.
Using the Add Print Driver wizard, you will be able to choose the connection type and start the installation procedure.
Download and install the full feature printer driver and software. For Windows OS, download the .exe file type.
During the installation, you are prompted to choose the connection type. Based on the printer compatibility, select the connection type and complete the installation.
HP AMP 130 Driver Installation for Mac
It is advisable to download and install the latest driver and software for the printer
Download the updated printer driver and software from this website.
For Mac operating system, you have to download the .dmg file type.
After completing the download process, start to install it on the computer.
During the installation, you have to choose the connection type.
Check the printer compatibility and select the connection.
Follow the instructions that are displayed on the screen to complete the installation.
Now your printer is ready to print a document.
If the printer prints a document, you can print the desired print job.
HP AMP 130 Wireless Protected Setup
HP AMP 130 Wireless Protected Setup in Windows
Initially, you have to install the HP AMP 130 printerHP AMP 130 Setup drivers and software on the computer just to use it on a wireless network. During the setup process, choose the connection type as Wireless. Make use of the steps that are given below to set up a wireless connection in windows computer:
Step1- Prep for the installation process:
Power on your computer, router and also the HP AMP 130 Setup.
You have to connect the printer and computer to the same wireless network connection.Place all the wireless network connected devices at a minimum distance to maintain the wireless signal strength.
Step2- Install the Printer Software and driver
Download and install the printer software on the Windows computer where you have saved the documents for printing.
To get a printer with full functionality, you need to download the latest driver and software.
After downloading the driver from this website, start the installation process by following the on-screen guides.
During the installation, choose Wireless as the connection type and complete the installation process.
After completing the process, you can start to print a document to check its printer’s performance.
HP AMP 130 Wireless Protected Setup in Mac
Go through the guides that are given below to set up a printer on a wireless network in Mac OS:
Step1- Make an arrangement for the installation
Make sure that you have all the items that are required for the wireless network connection.
Unplug all the USB cables as well as Ethernet cable if required.
Make sure whether your computer, printer and the router are powered on.
Verify that the printer and computer are connected to the same wireless network connection.
Load enough papers into the input tray and install the ink cartridges into the respective slot.
Step 2- Restore default Wireless Settings on the HP AMP 130 printer
Make sure that the wireless light is blinking on the printer’s control panel settings. A dialog box gets displayed.
If you find that the wireless light is not blinking, you need to click and hold the wireless button and the cancel button simultaneously for 3 seconds. After that, the wireless light starts to blink.
Step3- Printer driver and software installation
For Mac operating system, download the .dmg file type. Based on the on-screen guides, start the installation process.
During the installation, you have to choose the connection type as Wireless
Step 4- Configure Wireless Network Connection
After completing the installation process, you have to check your network configuration.
Index the authentication details, select the printer and click on the Continue option.
After the installation process, check whether that the printer is in the list. If not, you have to add the printer.
Select the print test page option to check the status of the printer. If the test page prints well, you can continue with a print job.
After completing the setup process, you can Print, Copy and Scan the desired document.
HP AMP 130 Digital Setup
HP AMP 130 ePrint Setup
HP ePrint enables the user to print a document or photo from any place, at any time. All you need to do is connect the HP AMP 130 Setup and the computer/mobile device(Android) to the same wireless network connection. Make use of the guides that are given below to print a document from HP ePrint. The Procedures for HP AMP 130 Setup with Touch display are as follows:
From the printer’s control panel, press the ePrint button: If you couldn’t find the icon, choose Web Services Setup, Network setup or Wireless settings to access web services.
Select Print info to get the information sheet which has the printer’s email address.
If you couldn’t find the email id, find the printer’s claim code and add @hpeprint.com to it.
The users can directly send the document to the printer by using this mail ID.
In case the printer doesn’t have touch screen display:
You have to print network configuration page or self test page to get the printer’s IP address.
Index the printer’s IP address in the browser to access the Web services setup page.
Select Enable to activate the HP ePrint feature.
Select the Print info page option to get the email ID of the printer.
HP AMP 130 Cloud Print Setup
With the Google Cloud Print, you can print a document or photo securely from any network connected device to the printer. To print with Google Cloud Print, you need waste your time to download any drivers or software. You have to first set up the printer with Google Cloud Print from a mobile or computer. Use the procedures that are listed below to set up Google Cloud Print:
Check whether the HP AMP 130 Setup is turned on.
Access the Chrome browser on your computer and go to Settings.
Navigate to Advanced settings and scroll down to view Google Cloud Print.
Press the Manage button: If you find your printer under New device, you have to register it. If the is listed under My devices, the printer is registered already and it is ready to print.
Now you can use the printer to print documents directly from your phone, computer and web pages.