HP Officejet 4652 Printer Setup AiO Support
To set up your printer go through the user manual or follow the steps given in this document. Refer these simple steps to set up a hp officejet 4652 setup:
Step 1: Unbox the package and remove the HP Officejet 4652 printer out of the box.
Step 2: Remove all the tape and packaging material from the printer and connect the power cord.
Step 3: Open the cartridge access door and install the cartridges into the Officejet 4652 printer.
Step 4: Load enough paper into the input tray and download the oj4652 printer software on your computer.
Step 5: The printer will calibrate and the cartridges will be aligned.
HP Officejet 4652 Printer Services
In order to establish connectivity between your computer and the 123 hp oj4652 printer, the driver software is used. You will not be able to connect your printer and computer without a driver software. In order to avoid printer issues, download the latest oj4652 printer driver in your computer.
Printer manual provides guidance to all the users in setting up their device and troubleshooting various printer issues. It provides steps on how to use the printer, computer and other printer accessories. They also provide necessary information about printing, scanning, faxing and copying.
HP Officejet 4652 Printer Unboxing and Setting Up
HP Officejet 4652 First-Time Printer Setup
When a printer is purchased, the first concern is to install or set up the device. You can refer the user manual to set up the printer and install the appropriate driver that supports the device. Setting up a printer is easy as a pie. Follow the step-by-step procedure and complete the setup:
Unbox the 123 HP Officejet 4652 Printer from the box
- Slice the tape that is holding the box together and remove the 123 hp Officejet 4652 printer out of the package.
- Check if all printer accessories are present in the package. Discard the packaging material that is found on the printer’s surface.
- Open the exterior door, remove the tape and packaging present inside the printer. Connect the power cord to the printer and the power board.
- Press the Power button and turn on your printer. First, set up a USB connection and then you can change it to a wireless setup.
- On your printer’s control panel, configure the device’s settings. You will be prompted to install the cartridges.
- Unwrap a new cartridge and remove the pull tab and tape from it. Open the cartridge access door and wait for the carriage to become idle.
- Insert the cartridge into the printhead and make sure you have placed it in the correct slot. Insert the other cartridge and close the cartridge door.
- Load paper into the input tray and wait for the printer to calibrate. The ink will be charged, cartridges will be aligned and an alignment page will be printed.
123 HP Officejet 4652 Driver installation
Before you start the driver installation, make sure whether your computer is connected to your printer or not. The driver software is uniquely designed for Windows and Mac operating system. Follow the step-by-step procedure to install 123 hp OJ4652 printer driver for both Windows and MAC operating system.
123 HP Officejet 4652 Driver Installation for Windows
Turn on your computer and make sure it is ready to Install the driver software. This can be checked in Windows Installation Settings.
If your system is not ready, then navigate to Device Installation Settings. In the Device Installation Settings window, select the option to automatically download the driver.
Get ready for driver installation by connecting your printer to the computer with a USB cable or through your local network.
Interfacing your computer with your printer will help to detect the printer by Windows during Print driver installation.
Open Devices and Printers and select your printer’s name, if it is not listed, then add your printer to the list.
Using the Add Print Driver wizard, you will be able to choose the connection type and start the installation procedure.
You will have the option to choose between Easy Installation (full feature installation) and Custom Installation.
Follow the on-screen prompts and complete the installation. If there is any 123 HP Officejet 4652 printer issue, refer the user guide for troubleshooting tips.
123 HP Officejet 4652 Driver Installation for Mac
You will have to install the latest driver software on your system for establishing flawless communication between your computer and printer:
Check if your 123 HP Officejet 4652 printer is turned on and make sure it is connected to your computer via USB cable or Ethernet connection.
From the Apple menu, select System Preferences and try to locate your printer’s name in the Printers and Scanners list.
If your oj4652 printer is not displayed on the list of results, then choose the Print Using option and add your printer’s name and click Next.
In the next window, choose the name of your HP Officejet 4652 printer and click the Add button. Select Full Feature Installation and proceed to the next step.
Disconnect the USB cable and connect it when it is prompted during the driver installation.
Once the setup is complete, scan or print any document to check connectivity.
HP Officejet 4652 Wireless Setup Support
HP Officejet 4652 Wireless Setup in Windows
HP Officejet 4652 Wireless Setup – You will have to install the HP Officejet 4652 Wireless Setup driver to set up your printer on a wireless network. During the installation, you will be prompted to select the connectivity type:
Step 1 – Requirements for the printer installation through WPS:
Press the Power button to turn on your printer. Turn on your computer and router.
Make sure you have an active network connection. Disconnect the USB from your printer and computer.
Step 2- Install the Printer Software
Follow the online guide and install the 123 hp oj4652 printer software from HP Support.
Go to the driver download page and enter your printer’s name or model number.
Choose the appropriate operating system and download the HP OJ4652 printer software.
The downloaded file can be found in the Downloads folder. The file will be saved in .exe format.
Run the file and click Agree to accept the terms and conditions. Select the connectivity type.
Choose Wireless and continue with the installation. Choose the type of installation and click Next.
After the installation, reboot your computer. Try to print a test document to check connectivity.
HP Officejet 4652 Wireless Setup in Mac
HP Officejet 4652 Wireless Setup – Following Procedure used for hp officejet 4652 wireless setup from Mac OS:
Step 1 – Prepare for installation
Make sure your computer and printer are turned on. Disconnect the USB cable or Ethernet cable from your printer and computer. Your devices should be kept in a ready state.
Turn on your router and connect your computer to the wireless network. Make sure the cartridges are installed and enough paper is loaded into the input tray.
Step 2- Restore default WirelessHP Officejet 4652 Wireless Setup Settings on the printer
On your control panel, the wireless light should be on. If the light is not on, press and hold the wireless button for three seconds.
Press the Cancel button and the error message will disappear. The wireless light will turn on or start blinking. Now, resume your installation process
Step 3 – Install the Software and Print Driver
Open a browser on your Mac. Go to the driver download page and download the driver file that suits your printer model and operating system.
Select the connection type during the installation process.
Follow the on-screen guidelines for successfully registering and activating the driver software.
Step 4- HP Officejet 4652 Wireless Setup Connection
Note down your wireless network name and password.
On your printer’s control panel, select the Setup option. Click the Wireless option and then select Wireless Setup Wizard.
The wizard will search for the routers available within range and a list will be displayed. Choose your network’s name from the list and enter the wireless network key.
Your printer will now be connected to the wireless network. Try to print or scan a sample document to check the connectivity.
If the document is not printing or scanning, then retry the entire procedure or try to reinstall the driver software.